How to Build a Wheelchair Ramp - Designs and Plans
As the world habitancy ages, or suffers long-term effects of accidents and debilitating illnesses, the need for modifications to personel homes and businesses also increases. One of the customary changes is the expanding of a wheelchair ramp to ensure safe accessibility. However, before grabbing a hammer, or hiring help, learn how to build a wheelchair ramp, with allowable designs and plans.
In a pinch, many habitancy will construct bizarre methods of getting a wheelchair into an inaccessible home or business. Maybe a concentrate of strong gentlemen will risk a hernia and pick up the chair. Others may grab a concentrate of boards and, after strategically placing the planks, roll the wheelchair over the steps. Neither convention is safe. Both methods are a temporary fix, at best. So, learn how to build a wheelchair ramp with allowable designs and plans.
Ramp Medical Wheelchair
First, rule what type of materials needed for the ramp. Wheelchair access can be made with a pre-made metal ramp to be assembled. If construction the ramp from scratch, is the ramp going to be concrete or wood? For habitancy construction a new home, a concrete ramp can be constructed when the sidewalks are poured. However, for most people, wood is an affordable and quick clarification to access difficulties.
Now, with designs and plans, learn how to build a wheelchair ramp. First, the incline should not be too steep, or the wheelchair may tip over backwards, potentially causing great harm. Specifications state a one-inch incline per foot of ramp. For example, the steps into a home are 24 inches in height. Therefore, the ramp needs to be at least 24 feet long, with a rise of only one inch per foot.
In expanding to length, the width of the ramp should be three feet. Plainly the ramp needs to accommodate the width of the chair. For now, maybe a child is using a smaller youth chair. The ramp still needs to be three feet wide, because he/she will finally require an adult chair.
The distance and width are correct-now what? Wheel guards are an exquisite security feature, when studying how to build a wheelchair ramp. A one-two inch high wheel guard will prevent a wheel from falling off the edge while use. At best, a handicapped personel can be stuck until help arises to get the wheel back on the ramp; at worst, slipping off the ramp can cause risky spills. So, the side guards are essential. In addition, rails are helpful for similar reasons. In addition, rails enable the handicapped person to pull him or herself up the ramp. Finally, a good ramp needs a small texture. In rainy or icy conditions, a wheelchair can speedily come to be a runaway on slick surfaces. Therefore, to provide added safety, a rough compound of pebbles can be added to the outside concrete. When using a wooded ramp, indoor-outdoor carpet, or adding sand or texture to the varnish will provide a small more traction.
So, learn how to build a wheelchair ramp with security in mind. Make sure the grade is not to steep, wheel guards and rails are in place, and texture has been added to the outside for added traction and safety. Use exact designs and plans, and stay safe.
How to Build a Wheelchair Ramp - Designs and Plans
==================== Products By Amazon ====================
Buy Crew Hair Products
